Globe 3850 User Manual download pdf (Page 10)

Page 11

AUTOMATIC SLICER OPERATION

BEFORE beginning to use the slicer for automatic slicing, MAKE SURE the auto engage

lever is in the “Manual” position.

Automatic slicer operation: NEVER put hand into chute arm opening on right side of

slicer. Keep hands and arms away from all moving parts.

1. Make sure the slicer is turned off (power indicator light not illuminated). Make sure auto engage

lever is in “Manual” position and that the food chute moves freely.

2. Pull the food chute completely towards you and load the food product. Swing the end weight into

position to secure food product.

3. If the food product is too long, place the end weight on top of the food product and use the end

weight prongs to hold the food product in place.

4. Auto engage lever must be in “Manual” position to start the slicer.

5. Press the start button. The power indicator light will illuminate. If the speed light is flashing, then

the auto engage lever is in the “Automatic” position. Press the stop button to turn off the machine.

Lower the auto engage lever to the “Manual” position and restart the unit.

BE ALERT. The next step will cause the food chute to move automatically and it can move

either direction on start up.

6. To make the food chute move automatically, pull or raise the auto

engage lever into the “Automatic” position (Fig. 11-1).

a. Model 3850 – To adjust the chute speed press the faster button for

60 strokes per minute and the slower button for 40 strokes per

minute.

b. Model 3975 – To adjust the chute speed press the slower or faster

buttons. The slicer defaults to speed 5 when the power cord is

unplugged and plugged back in. If the slicer is turned off but not

unplugged, it will return to the last speed used.

NEVER attempt to adjust, load or unload food chute when slicer is in automatic operation.

NOTE: Chute speed can be adjusted prior to or after auto engagement.

AUTOMATIC OPERATING INSTRUCTIONS

Figure 11-1

Auto Engage Lever

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

No comments

Globe 3850 User Manual Page 10